Sabrent EC-UEIS7 Uživatelský manuál

Sabrent EC-UEIS7 USB 2.0/ESATA TO 3.5″ IDE/SATA/SATA II ALUMINUM HARD DRIVE ENCLOSURE WITH COOLING FAN 1. Device Setup3.5 Inch IDE Drive: 1. Check if

Figure B: 3. Plug the USB or E-Sata cable into your computer’s USB or E-Sata port:4. Flip the power switch ON:Driver Setup Windows 2000/XP/Vista/7 For

1. Windows will detect New Hardware, and prompt you to install driver.2. Choose “Search for the best driver”.3. Windows will find the necessary driver

4. At the following prompt, click “Next”:5. Click “Next”:

6. Assign a drive letter to the drive, then click “Next”: 7. Click on “Format this volume with the following settings:” Change the “File system” to

8. Click “Finish”. Windows will now begin formatting and initializing the disk: 9. Open “My Computer” and verify that the drive shows up properly:

2. You may also need to change the HDD settings from Dynamic to Basic, then format NTFS, and give it a drive letter, but you should back up the data

To convert the disk to a GPT partition disk in Windows Vista and Windows 7: Open “Disk Management”, locate the disk in the list, right click the disk

Figure B: 3. Locate the IDE power cable. Connect it to the IDE power port on your drive:Figure A:

Figure B: Figure C: 4. Locate the IDE data cable. Connect it to the IDE data port on your drive.Figure A:

Figure B: Figure C: 5. Insert the hard into the enclosure, as shown below:Figure A:

Figure B: 6. Place the cover back on the enclosure. Screw it back in place:Figure A:

3.5 Inch SATA Drive 1.Remove the screws, on the backside of the fan, using the included screwdriver. Remove the panel:Figure B: Figure A:

1. Locate the SATA port on the enclosure. Plug the hard drive directly into the port.Figure A: Figure B: Figure C:

2. Place the cover back on the enclosure. Screw it back in place:Figure A: 2. Computer Setup1. Connect the USB cable into the USB port on the enclosur

Alternatively, connect the E-Sata cable into the E-Sata port if you require it. (Note: E-Sata connector may be a bit difficult to plug in, and may req